Pegasus Astro Pocket Powerbox Advance Gen2 - PPBADV

$341.82
Article number: PEG-PPBADV
Availability: In stock
Delivery time: In Stock!

The latest addition to the Powerbox family is the Pocket Powerbox Advance!  It offers 12 amps of total distributed current...more than the Pocket Powerbox (10A) and less than the big dog Ultimate Powerbox V2.  It is designed to work with your PC or as a standalone device...no need to plug it into your computer every time.  You will love the multiple features of the Pocket Powerbox Advance

Four (4) 12V DC Power Outlets

There are four separate 12V DC power outlets, each of which can be switched on and off via software.  The output can also be adjusted so that you can power your DSLR or Mirrorless camera.  Choose 3, 5, 8, 9 or 12 volts!  You can also pick up an optional battery coupler for your Canon, Nikon, Fuji or Sony camera.

Two (2) Dew Heater Outlets

Power your dew heaters with two pulse width modulation (PWM) outlets.  You can also control the dew heaters remotely via the included Pocket Powerbox Advance software, or set them to "Auto" and let the environmental sensor control them based on its dew point reading.

Three (3) USB3 Ports

The Hub at the back of the Pocket Powerbox Advance has three USB3 SuperSpeed ports that support Hi-Speed, Full Speed and Low Speed.  No worries that 5 GBps SuperSpeed transfers will be affected by USB2.0 traffic, either, since the SuperSpeed Hub operates in parallel with the USB 2.0 controller.

One (1) USB Port & One (1) RJ12 Port

Plug your Raspberry PI 3/4, Intel Compute Stick M3/M5 or any device that requires 5V and power it from the 5.2V, 3A USB port.  If you have an external focus controller or other accessory that uses and RJ12 port, you can plug them into the Pocket Powerbox Advance.

Built-in Voltmeter and Ampmeters

A built-in voltmeter helps protect your equipment by cutting power should the input reach more than 14V, and input voltage is monitored and displayed in real time.  There are also four (4) ampmeters builtr into the Pegasus Pocket Powerbox Advance!  The first one reports the total current consumed, the second monitors the 12V outputs, and there are two that monitor the channels for dew heaters.

External Environmental Sensor

This external sensor takes temperature, humidity and dew point measurements and displays them on your screen via the Pocket Powerbox Advance software.  Dew heaters can also be automatically controlled by setting them to Auto and allowing the sensor to decide when they need to be turned up or down and by how much.

ASCOM 6 & INDI Supported

Using the included Pocket Powerbox software as a server, you can use the latest ASCOM 6.4 supplied drivers to pass on environmental settings to supported software like MaximDL or Sequence Generator Pro.  You can also switch all 12V outputs on or off via ASCOM Switches.  INDI is also fully supported.  You can bundle it with Stellarmate or another device that uses INDILib.

Equipment Protection Features

  • Reverse Polarity Protection
  • Hardware Watchdog Reset
  • Power Issue LED Indicators
0 stars based on 0 reviews